Is Trophy tape accurate?
These tapes are flexible and make precision measurements for the mass easier and more accurate. Many professional scorers also use a folding rule with an extension for calculating the spread credit, but if you are doing this just for yourself and not the book, you do not need to be quite so precise.
How do you measure a trophy buck?
How to Score a Buck—the Right Way
- Use a steel tape to measure from the inside of one beam to the inside of the other.
- For tine length, stretch masking tape along the top edge of the beam, and then measure from the top of the tape to the tip of the antler.
- Take four circumference measurements per side with a steel tape.
What is a good whitetail score?
A two to four inch brow tine is fairly typical. Five to six inches is excellent. The second point (called the G-2) is another key area in determining a buck’s score. Good bucks will have at least seven or eight inch second points.
How big is a 140 class buck?
This measurement is around 7-8 inches. After you have referenced your initial measurements you will be ready to start field scoring the buck. Take a look at the picture above to memorize the reference points.
How many inches can a buck grow in a year?
Spurred by hormones and excess nutrition, antlers grow from March through late August. Demarais said antlers can grow about 1/8 inch daily for yearlings and about 1/4 inches daily for adult bucks. That’s as much as 1½ inches per week for adults!
What are the red numbers on a tape measure?
The red indicates 16-inch-on-center spacing. This is a common framing spacing for wall studs, floor joists and common roof rafters. If you decide to space framing at 24-inch centers, the red marks will be at every other foot marking on the tape measure.
Where is CM in tape measure?
The tape, also known as the blade, is what you use to get your measurement. Most tapes feature imperial units (inches) on the top row and metric units (centimeters) on the bottom.
What comes after 3 4 on a tape measure?
What you should do is memorize the common fractions down to sixteenths. Here they are: 1/16, 1/8, 3/16, 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16 and the inch mark.